HSB-Centripetal roller pin- The thrust force cylindrical roller bearing may withstand the heavy load, The rigidity is big, Because the bearing has the flange attachment system, Therefore no longer needs any other fixed parts, Does not need in the assembly process to regulate.

HSB-ZARN series centripetal roller pin - thrust force cylindrical roller bearing is the bidirectional thrust bearing, Center at the same time the circle takes the centripetal needle bearing addendum circle, The axial pre- load which the inner loop width coordinates with the center circle and the thrust force roller to the lunch to screw tight locks when nut can obtain prearranges axial prearranges.

HSB - the ZARF series bearing center circle is suitable in the flange installment and has the radial direction and the axial oil in and the oil mouth, Attachment spiral Kong Gong makes using of the installment seal place module.

ZARN..L and ZARF..A L series blow-out patch width lengthens, The outer diameter is the stepped appearance.

TN=Plastic maintenance frame, Permission operating temperature;120 ºC continuously, 180 ºC short-terms,
1) The clamping screw screws tight the moment of force according to the factory stipulation, The clamping screw and the cap nut in do not supply goods in the scope.
2) Oil lubrication limit rotational speed, But the oil must fully cool,
3) Before the bearing installment the use oil hole should not squeeze in the seal to fill.